Learn the Basics of Changing a Flat Tire from Your Clinton Honda Dealership

All motorists at some point will probably be faced with the unexpected and highly annoying occurrence of a flat tire. This can happen for a number of different reasons, and it is always best to make sure that you are prepared for it. Learn the basics of changing a flat tire from your Clinton Honda dealership.

Tools

Of course you can’t change a flat tire if you don’t have the proper tools on hand that are needed to get the job done. Be sure that you always carry these items in your trunk. Obviously you will need a spare tire, or at least a donut to hold you over. Then you will need something to secure the vehicle with, like some bricks or wedges of wood. The rest of the items include a jack to raise your vehicle up, a wrench, and a screwdriver.

Changing the Tire

Before you begin, be sure to secure your vehicle with either your bricks or your wedges of wood to block it from rolling. Then you need to raise your vehicle up with your jack. Once your vehicle is in place, remove the wheel cover with your screwdriver. Use your wrench to loosen all of the lug nuts, and then use your hands to actually remove them. Grasp the tire and pull it straight towards you to take it off. Then put your spare tire or donut on and replace the lug nuts. Lower the vehicle back down, tighten everything, and put the wheel cover back on.

Powered by Bookmarkify™

Tags: Clinton area pre-owned Honda dealer, Clinton NJ area Honda sales, Honda dealership near Clinton, Honda service center near Clinton
Posted in Clinton Honda Service | Comments Off on Learn the Basics of Changing a Flat Tire from Your Clinton Honda Dealership